How much QPR High Performance Cold Mix do I need to repair the pavement?
admin2017-03-11T07:32:35-05:00Enter the dimensions in our easy to use calculator to determine the amount. Click to open the calculator.
How long will it take the patch to harden completely?
admin2013-10-25T14:33:03-04:00As noted on the bag, QPR high performance cold mix is specifically designed to remain somewhat pliable after application. This allows the product to continue to fill small voids and crevices, through continued compaction. Totally filling these voids prevents water (and in the winter – ice) from getting into the [...]
I didn’t use all the QPR high performance cold mix in the bag, can I use the remaining material later?
admin2013-10-25T14:33:25-04:00Yes. Just seal the bag opening tightly, and the remaining material will stay usable for up to one-year. In a couple months, you’ll be ready for that winter pothole that always appears at the end of your driveway.
Can I get QPR high performance cold mix in bulk?
admin2013-10-25T14:33:50-04:00Yes you can. Depending on the quantity you need, we can either produce some bulk material directly at your location or we can put you in contact with one of our distributors. Please go to the “contact us” page to contact your local QPR representative.
What separates QPR high performance cold mix from the rest of the products on the market?
admin2013-10-25T14:34:17-04:00What separates our product from the rest is our proprietary, water-repelling additive. Our additive will allow you to repair the damaged pavement area without the need to remove any water. Simply remove any lose debris and compact the material in two inch increments. Furthermore, each batch that we produce throughout [...]
How can I become a distributor of either your bagged or bulk QPR high performance cold mix?
admin2013-10-25T14:34:41-04:00Simply fill out the distributor form on our website and your local QPR representative will contact you shortly.
What is the minimum quantity that I can produce for you to make QPR high performance cold mix directly in our yard?
admin2013-10-25T14:35:16-04:00There are a lot of variables that affect the answer to this question. Please go to the “contact us” page and contact one of your local QPR representatives directly.
How long will it take to produce a full load of QPR high performance cold mix?
admin2013-10-25T14:35:46-04:00If you are looking for a full load of material, or 800 tons, with a production rate of 300 tons per hour, we can have this load completed within three hours.
Do I have to meet the QPR aggregate specification?
admin2013-10-25T14:36:07-04:00Yes you do. The reason for this is that our gradation has been specifically crafted in order to generate a high performing spec. The gradation we have provided you will provide your material with the best chance to perform.
If I want to run your QPR liquid blend through my asphalt plant, where can I get more information on the process such as flashpoint?
admin2017-03-11T07:32:35-05:00You can find this information in the “technical” tab.