6690 Hot Applied Crack Sealant

Please contact your local QPR representative. Their information is located in the “contact us” tab.

QPR® 50lb 6690 Hot-Applied Crack Sealant is a flexible, rubber-like commercial grade product that is used to repair cracks of any length or width in asphalt pavements. It starts out as a solid, rubber block which is then melted in a special kettle and is heated to 375 degrees F. [...]

After QPR® 50lb 6690 Hot-Applied Crack Sealant has been applied and allowed to cool, it is designed to remain flexible, allowing it to expand and contract with the outside air climate. It is normal for this type of material to flex to the touch. It will also temporarily retain car [...]

If you park directly on top of QPR® 50lb 6690 Hot-Applied Crack Sealant with hot tires after a prolonged drive at highway speeds may cause the crack filler to pull up. Hot tires can re-heat the crack filler, causing it to adhere to the tire when it cools. A small [...]

Almost immediately! Pavement sealer can be applied to QPR® 50lb 6690 Hot-Applied Crack Sealant within 5-10 minutes.

The texture of the crack filler is smoother than the texture of the asphalt causing it to be visible through the seal coat. This is unavoidable if you want your driveway protected.